Super High Sensitive X-ray camera XC+604HI
◆ It is X-ray camera of the super -high sensitivity and the high resolution by a fiber optics
image intensifier.
◆ Out put signal is NTSC conformity Composite Video, 1Vp-p, 75ohm Unbalanced
◆ It can be used for the check of the size of a weak X-ray beam
○ It is a small and fine resolution, X-ray camera by the high sensitivity scintillator and the taper fiber Optics.
 |
Basic performance | |
| Density of scintillator | 4.51ｇｒ/ｃｍ3 | |
| Geometric electron opyics system | Image intensifier Gain 104Above | |
| Unit sell size | 8.4μm×9.8μm | |
| luminescence wave length | 565nm | |
| X-ray resolution | 1/2 inches | |
| Optical system | Taper fiber 25 : 1/2"CCD | |
| Total pixels | 811(H) × 508(V) |
|
| Externals specification etc. |
|
| Power-supply voltage | 12V |
| Current consumption | Max 160ｍA |
| Operating temperature | +5～+４０℃ |
| Storage temperature | 65％RH or less |
| Dimension | 90mmφ×1700mm(L) |
○ Accumulation and the gamma selection etc. of the X-ray image frame can be done easily by a remote controller of
the attachment.
○ Output signal is obtained by the BNC connector with doing in accordance with NTSC or EIA and usual liquid crystal
monitor.